Thank you for purchasing your new IC Railing products. Please read the installation instructions completely before beginning any stage of your installation.
Before beginning the installation you will need:
- Safety glasses.
- Measuring tape.
- Permanent fine tip marker.
- Torpedo level or equivalent.
- 4″ or 5″ grinder with several NEW cutoff wheels 1/16″ or 1/8″ thick.
- A set of (Allen) hex wrenches sizes 2.0mm, 2.5mm, 4.0mm & 5.0mm.
- Fasteners to mount posts (SS 3/8″ lag, wedge anchor or screw).
- Fasteners to mount hand rail.
Installation Instructions PDF